Netflow on Nexus 1000v

Published: 2013-10-22. Last Updated: 2013-10-22 00:51:22 UTC
by Johannes Ullrich (Version: 1)

This is a guest diary submitted by Basil Alawi.

What is NetFlow?

NetFlow is a traffic-summarization format that was first implemented by Cisco Systems, primarily for billing purposes. Network flow data (or Network flow) is a generalization of NetFlow.

Network flow collection differs from direct packet capture, such as tcpdump, in that it builds a summary of communications between sources and destinations on a network. This summary covers all traffic matching seven particular keys that are relevant for addressing: the source and destination IP addresses, the source and destination ports, the protocol type, the type of service, and the interface on the router[i].

SiLK

SiLK is a suite of network traffic collection and analysis tools developed and maintained by the CERT Network Situational Awareness Team (CERT NetSA) at Carnegie Mellon University to facilitate security analysis of large networks. The SiLK tool suite supports the efficient collection, storage, and analysis of network flow data, enabling network security analysts to rapidly query large historical traffic data sets[ii].

Netflow on VMware ESXi:

NetFlow is available in vSphere distributed switch version 5 or later as well as in Cisco Nexus 1000v. VMware vSphere 5 supports NetFlow v5 while Cisco Nexus 1000v support Netflow v5 as well as Netflow v9.

Running netflow on a vSphere environment will provide visibility of the following:

· Intrahost virtual machine traffic (virtual machine–to–virtual machine traffic on the same host)

· Interhost virtual machine traffic (virtual machine–to–virtual machine traffic on different hosts)

· Virtual machine to physical infrastructure traffic

Test Lab

The test lab consist of Vmware ESXi 5.1 as a host ,Ubuntu 13.04 as netflow collector and analysis workstation , Kali Linux with an IP of 192.168.207.30 , Linux#1 server with an IP 192.168.207.12 , Linux#2 with an IP of 192.168.207 and Cisco Nexus 1000v switch with an IP of 192.168.207.139.

SiLK Installation

For this diary the SiLK will be running on a fresh Ubuntu 13.04 installation. Here is a step by step instruction on how to install SiLK on Ubuntu Linux.

1-Install gcc , gcc-c++, glib2, glib2-devel, libpcap, libpcap-devel, python and python-devel

sudo apt-get -y install libglib2.0-dev
sudo apt-get -y install libpcap-dev
sudo apt-get -y install python-dev

2-Download Silk and fixbuf. Latest version can be found at http://tools.netsa.cert.org/

wget http://tools.netsa.cert.org/releases/silk-3.7.2.tar.gz

wget http://tools.netsa.cert.org/releases/yaf-2.4.0.tar.gz

wget http://tools.netsa.cert.org/releases/libfixbuf-1.2.0.tar.gz

3-Install fixbuf

tar -zxvf libfixbuf-1.2.0.tar.gz

cd libfixbuf-1.2.0/

./configure

make
sudo make install

3-Install Yaf

tar -zxvf yaf-2.4.0.tar.gz

cd yaf-2.4.0

export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig

./configure

make

sudo make install

4-Install SiLK

tar -xvzf silk-3.7.2.tar.gz
cd silk-3.7.2/
./configure \
--with-libfixbuf=/usr/local/lib/pkgconfig/ \
--with-python
make
sudo make install

5- Add the following paths to ld.so.conf

cat <<EOF >>silk.conf
/usr/local/lib
/usr/local/lib/silk
EOF
sudo mv silk.conf /etc/ld.so.conf.d/

6- Run ldconfig

sudo ldconfig

7-Create /data directory

sudo mkdir /data

8- Configure rwflowpack

cat /usr/local/share/silk/etc/rwflowpack.conf | \
sed 's/ENABLED=/ENABLED=yes/;' | \
sed 's/SENSOR_CONFIG=/SENSOR_CONFIG=\/data\/sensors.conf/;' | \
sed 's/SITE_CONFIG=/SITE_CONFIG=\/data\/silk.conf/' | \
sed 's/LOG_TYPE=syslog/LOG_TYPE=legacy/' | \
sed 's/LOG_DIR=.*/LOG_DIR=\/var\/log/' | \
sed 's/CREATE_DIRECTORIES=.*/CREATE_DIRECTORIES=yes/' \
>> rwflowpack.conf
sudo mv rwflowpack.conf /usr/local/etc/

9- copy the startup script into /etc/init.d and set it to start on boot.

sudo cp /usr/local/share/silk/etc/init.d/rwflowpack /etc/init.d
sudo sudo update-rc.d rwflowpack start 20 3 4 5 .

SiLK configuration:

1-Create and configure the /data/silk.conf file. You can use the below text, replace the word Nexus with your netflow enabled device.

sensor 0 Nexus

class all

sensors Nexus

end class

# Be sure you understand the workings of the packing system before

# editing the class and type definitions below. Editing above this

# line is sufficient for sensor definition.

version 1

class all

type 0 in in

type 1 out out

type 2 inweb iw

type 3 outweb ow

type 4 innull innull

type 5 outnull outnull

type 6 int2int int2int

type 7 ext2ext ext2ext

type 8 inicmp inicmp

type 9 outicmp outicmp

type 10 other other

default-types in inweb inicmp

end class

default-class all

# The default path format from SILK_DATA_ROOTDIR

path-format "%N/%T/%Y/%m/%d/%x"

# The plug-in to load to get the packing logic to use in rwflowpack.

# The --packing-logic switch to rwflowpack will override this value.

# If SiLK was configured with hard-coded packing logic, this value is

# ignored.

# The plug-in to load to get the packing logic to use in rwflowpack.

# The --packing-logic switch to rwflowpack will override this value.

# If SiLK was configured with hard-coded packing logic, this value is

# ignored.

packing-logic "packlogic-twoway.so"

2-create and configure the sensor.conf file

probe Nexus netflow-v9

listen-on-port 9901# SiLK will receive netflow traffic on this port number

protocol udp

accept-from-host 192.168.207.139 #Nexus 1000v management IP address

end probe

sensor Nexus

netflow-v9-probes Nexus

internal-ipblock 192.168.207.0/24

external-ipblock remainder

end sensor

3-Allow traffic from udp port 9901 from the Nexus Management port

sudo iptables -I INPUT -s 172.16.1.3 -p udp -m udp --dport 9901 -j ACCEPT

sudo iptables-save

4-Start the rwflowpack

sudo service rwflowpack start

Nexus Cisco 1000v

I am not going to discuss the installation of Nexus Cisco 1000v in this diary; a step by step guide is available at http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_2_2_1/install_upgrade/guide/b_Installation_and_Upgrade_Release_4_2_1SV2_2_1_series_release.html

Nexus Cisco 1000v Configuration

Cisco Nexus 1000v:

Here is the steps to configure

1-Enable netflow

Config t

feature netflow

2-Configure the exporter

flow exporter ExortSilk

description Export Silk

destination 192.168.207.140

transport udp 9901

source mgmt0

version 9

3-configure the flow monitor

flow monitor NexusMonitor

record netflow-original

exporter ExportSilk

4-Assigning the Flow Monitor to an Interface

int vethernet 1

ip flow monitor NexusMonitor output

SiLK Commands:

Here is a very brief description of some SiLK commands:

rwfilter [1] :

rwfilter is the most used command in the SiLK suite. It serves as the starting point for most

Analyses.

rwcut[2] :

rwcut Print selected fields of binary SiLK Flow records and prints the records to the screen in a textual, bar (|) delimited format .rwcut can take input piped from rwfilter command.

rwstat [3] :

rwstats - Print top-N or bottom-N lists or summarize data by protocol , rwstats has two modes of operation: it can compute a Top-N or Bottom-N list, or it can summarize data for a list of protocols.

SiLK Usage:

Here are some examples of SiLK usage:

1-Finding the top talkers

rwfilter --sensor=Nexus --protocol=6 --pass=stdout | rwstats --fields sIP,dIP --count=10 --bytes

In this example rwfilter will read data from Nexus sensor, --protocol switch is the IP protocol number[4] ,the most common used protocols are icmp=1,tcp=6 and udp=17 ,0-255 means select all possible IP protocols ,. The --protocol switch is a partitioning switch, --pass=stdout will Send SiLK flow records matching partitioning parameters to pipe . By default the output of rwfilter is in binary format not in ascii format. The rwstats will compute the Top-N list, the –fields sIP,dIP will display source IP address and destination IP address ,--count=10 will choose the top 10 and –bytes will choose the top 10 based on the bytes value.

2-Filttering traffic based on port number

rwfilter --sensor=Router --aport=123 --pass=stdout| rwuniq --fields 1

sIP| Records|

72.232.197.50| 10|

63.246.147.180| 10|

63.246.147.170| 9|

72.232.188.10| 8|

72.232.188.26| 18|

In this example rwfilter will read data from Nexus sensor,--protocol=17 will select UDP flow records,---aport=123 will filter traffic based on port number 123 which is NTP port . rwuniq[5] will summarize SiLK Flow records by a user-specified key comprised of record attributes ,

--fields sIP will display the source IP address.

3-Finding traffic with outside world:

rwfilter --sensor=Nexus --saddress=192.168.207.0/24 --daddress=192.168.207.0/24 --fail=stdout | rwuniq –fields 1-4

147.52.159.12| 192.168.207.30| 80|37840| 2|

147.52.159.12| 192.168.207.30| 80|52135| 2|

173.194.35.110| 192.168.207.30| 80|37311| 2|

147.52.159.12| 192.168.207.30| 80|37975| 2|

147.52.159.12| 192.168.207.30| 80|37557| 1|

178.236.7.67| 192.168.207.30| 80|34630| 3|

173.194.35.105| 192.168.207.30| 80|53842| 2|

182.50.136.239| 192.168.207.10| 80|47031| 2|

173.194.35.102| 192.168.207.30| 80|59682| 2|

173.194.35.111| 192.168.207.30| 443|50579| 3|

109.63.48.74| 192.168.207.10| 80|48185| 2|

In this example rwfilter will write all the records that doesn’t have both source and destination IP address within the 192.168.20.0 range.

4- Finding all the traffic the exceed a certain size

rwfilter --sensor=Nexus --proto=0-255 -bytes=10000000- --pass=stdout |rwcut

147.52.159.12| 192.168.207.30| 80|37565| 6| 11526| 16130997| |2013/09/17T17:48:00.241| 241.447|2013/09/17T17:52:01.688|Nexus|

147.52.159.12| 192.168.207.30| 80|37565| 6| 11489| 15807248|

In this example rwfilter will pass all of the records that have 10000 bytes or more. The hyphen symbol (-) is more or equal.

[1] http://tools.netsa.cert.org/silk/rwfilter.html

[2] http://tools.netsa.cert.org/silk/rwcut.html

[3] http://tools.netsa.cert.org/silk/rwstats.html

[4] http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml

[5] http://tools.netsa.cert.org/silk/rwuniq.html

[i] http://tools.netsa.cert.org/silk/faq.html#what-is-flow

[ii] http://tools.netsa.cert.org/silk/faq.html#what-silk

Keywords:

1 comment(s)

Internet Storm Center

Netflow on Nexus 1000v

Comments

Anonymous

Oct 24th 2013
1 decade ago

Netflow on Nexus 1000v

Comments

Anonymous

Oct 24th 20131 decade ago

Oct 24th 2013
1 decade ago